Best Mods for Under $100

[shadowhawk]

Some have used these mounted in Ramboxes...why have just one when you can have two?

https://www.amazon.com/dp/B001Q4XIHG/ref=cm_sw_r_cp_apa_i_CfboFb1PY910K


Sent from my HTC U11 using Tapatalk

mainly because 2 wont' fit behind the seat if you did the back seat mod.

 

[4eyedconekiller]

mainly because 2 wont' fit behind the seat if you did the back seat mod.

You could mount them to the floor...

 

[4eyedconekiller]

Thinking I’ll get him to do the back doors and wrap around the back like this photoshopped pic of my truckView attachment 218794

I’ve contemplated that very same thing. I went with a carbon fiber printed vinyl, so not sure how it would look



Bottom is a better pic of the pattern

 

[Villalobos]

I want to dress up my engine bay. I like how the classic mopar had the colors in the engine. I’m hoping to make mine black and white. Have seen the painted covers and like that look. Also was looking for some different things on the google machine and found a billet kit, looks really good, but not cost effective for me. So I decided to paint a cap to see how it looks and if it holds up. Scuffed it up a bit and used some good outdoor paint that I had lying around. Actually it’s paint and primer, easily accessible on the shelf at cents over $5 with tax. Anyway here it is, I’m going to give it a few days and then adjust paint or continue with the same.

 

[NJMOPAR]

Might want to cover your heater & AC hoses with this?
https://www.amazon.com/dp/B00B1EO2O4/ref=cm_sw_r_cp_apa_i_akAoFb8H7V3F0

 

[co-pilot]

Got my door pillars done in gloss black tonight. Son did it for free.View attachment 218764

Man!!!!!....I've been wanting to do this
That looks good.
Next on my to do list!

 

[IRSmart]

Thinking I’ll get him to do the back doors and wrap around the back like this photoshopped pic of my truckView attachment 218794

I’ve seen that look somewhere before...

 

[shadowhawk]

You could mount them to the floor...

if you have a mega cab then you have room. There's barely enough room for one because of belts and brackets to fit much of anything.

 

[PapaCap]

How about a Catch Can for some additional HP.

Did you put it on a dyno before and after installation the catch can?

 

[Octane]

.

 

[ExpressRules]

Did you put it on a dyno before and after installation the catch can?

Its a well known fact that a catch can, properly installed, adds a minimum of 60hp ( 70 to 75 if it is a stainless steel can with braided line covers).

 

[NJMOPAR]

Its a well known fact that a catch can, properly installed, adds a minimum of 60hp ( 70 to 75 if it is a stainless steel can with braided line covers).

Looks like I'm in the 75HP camp!

 

[GRN69CHV]

Within the last month:
1.5" front lift 85.00
3/4" rear lift 30.00
Shorty Antenna 26.00
DeeZee Tailgate Damper 34.00
Air Lift 1000 Air Bags 85.00

 

[PapaCap]

Its a well known fact that a catch can, properly installed, adds a minimum of 60hp ( 70 to 75 if it is a stainless steel can with braided line covers).

Someone has been drinking “Catch Can Koolaid”. No dyno, no dice. Additionally, the material of a catch can has no contributing factor to HP gain. How could stainless steel be better than aluminum, steel, or plastic?

 

[ExpressRules]

Someone has been drinking “Catch Can Koolaid”. No dyno, no dice. Additionally, the material of a catch can has no contributing factor to HP gain. How could stainless steel be better than aluminum, steel, or plastic?

OMG, are you saying it's not true??

 

[Octane]

Brushed stainless steel has a lower drag coeficient compared to the aerodynamics of other materials.Especially if the stainless has high levels of moly enriched oil flowing thru it."They" say. See? You can make anything sound better.lol

 

[KnurledNut]

Gentlemen, let's not forget that adding any decal from an aftermarket auto parts company will increase horsepower by 0.0003% and decrease drag co-efficiency by 0.0006%. I know this to be true. I seen it on roller derby.

 

[NJMOPAR]

$24.99 for a 1'x 5' roll of 3M 1080 Series carbon fiber in Anthracite Gray

 

[tnctx02]

Where di you get it? Is it hard to put on?
Would love to make mine the color of my paint but am worried about screwing up the application.

 

[NJMOPAR]

Got it on Amazon. It's a PITA to apply, I had to cover the whole vent then cut out the center while pressing the edges in place. Compound curves are a challenge. Xacto knife is a must.