NETim's latest activity
-
NETim replied to the thread Front Wheel Bearing Removal.My vocabulary got a workout, that's for sure. $170 was a lot to spend for this tool, but at that point, it was well worth it. I... -
I feel yer pain! Been there, done that! It's one of those where like you described, one 'might' come off *Relatively* easy..or could be...
-
NETim replied to the thread Front Wheel Bearing Removal.After a full day yesterday and this AM, I gave up. That bearing wasn't coming out. I broke down and went to the local parts store...
-
NETim replied to the thread Front Wheel Bearing Removal.I am thinking I will just drop the knuckle today, provided I get the driver's side re-assembled. :) I had the tie rod end and the...
-
Classic method for the HD Rams is using an appropriate socket and extension on the wheel bearing bolts while turning the wheel to push...
-
NETim replied to the thread Front Wheel Bearing Removal.I figure at least another 5 years. I plan to run it into the ground if I can.
-
NETim replied to the thread Front Wheel Bearing Removal.I was a bit leery of the PS method. But it did pop out relatively easy I think. The wood braces against the truck frame creaked and...
-
Front hubs....can be a tough job as you pointed out. I personally wouldn't advocate using the power-steering method. Even though it's...
-
NETim replied to the thread Front Wheel Bearing Removal.PS method worked! Now to bolt things back together. Thanks!
-
No worse then trying to pararrell park or get out of a tight situation.
-
NETim replied to the thread Front Wheel Bearing Removal.That's not going to stress out the PS system? They're pricey and hard to get to boot.
-
My truck is nearing 100k. I am not experiencing any bearing related issues, noise etc, but since I'm in there doing the front brakes...
-
NETim replied to the thread 8HP trans temp 240.I would also add this thermostat kit as well. The transmission takes forever to warm up with just the bypass installed. Thermostat Kit
-
NETim replied to the thread 8HP trans temp 240.I don't have first hand experience but I've read that the heating unit on the transmission can stick and not allow fluid to flow into...
-
I bought the Dorman pan replacement (265-850) w/ replaceable filter. Also got some Valvoline MaxLife ATF. Haven't had any issues. Just...
Members online
- originaljason
- etbrown4
- hunterdan
- a320ca
- BLUKTY2
- Jas34
- JHoward
- Khalifa45
- Marshall
- keith1138
- doug158
- Birdoprey
- Slinge
- ginandtonic
- Heathen-19
- Daniel12
- JW2 Innovations
- WSix
- TC
- chewychomp
- Daw14
- dhay13
- mikey2k
- jws123
- Sean J Blackburn
- U&A
- Dean2
- bulldog1891
- rebel_driver
- Yardbird
- British Bulldog
- Glen OS
- Ken226
- verajose75
- Dan Topp
- Choppz
- Cloop
- Jawsopter