Search results

  1. B

    14 crew cab [email protected]

    Just went [email protected] full weight 5440lbs with driver, no prep other than Hoosier DR2 radials. 14 5.7 crew cab 8 speed 3.92 180 tstat K/N intake Mufflex delete Nitrous outlet X series single nozzle on a 175 shot through an NOS mini progressive controller. Jay Greene custom tuned. -166 DA...
  2. B

    5.7>397 stroker build

    Well, it's time. I've been successfully spraying a 175 shot, and sometimes a 200, on a bone stock 5.7 for over a year and a half, and run some impressive times in the process. I've done no damage yet, but it's time to start the next phase. So I found a cheap 5.7 long block and I bought...
  3. B

    Wannagofast get together?

    Anybody interested in coming to the wannagofast Georgia, or wannagofast Florida event next year? I attended one as a spectator earlier this year in GA, and it was amazing. Anything from 200hp 4cyls to 2000hp lambos and vipers. It's a half mile speed trap race event. There is a heavyweight...
  4. B

    3.92+ 8spd+ nitrous= a really bad time. My 5,000 mile review

    Recently made the switch to 3.92 gears, and I am beginning to think I've made a mistake. Daily driving, I feel like it's harder to drive in the city. It's nearly impossible to hold a gear while in a turn. I find that it constantly wants to up shift while I'm turning, and I end up coming out...
  5. B

    Rear axle problems

    I've been noticing a ratcheting noise from the rear end when turning, only audible with the windows down. This was concerning, since I have a stock rear end with the OEM LSD. Also, since I just got my 3.92 gears and planned to install them today... So I popped the cover to inspect and found...
  6. B

    Any crew cabs on 3.92s with the 8 speed out there?

    The truck is going under the knife Saturday, I'm throwing the new 3.92 gears in. Just wondering if there are any other guys with the 3.92/8 speed combo on a crew cab? I'm trying to estimate what kind of ET and MPH difference I'd be looking at. Ought to be fairly quick with 3.92/8 speed and a...
  7. B

    14 ram vs 14 challenger SRT 392

    Had some fun at Atmore dragway today. There are more videos from today on my channel but they kept making me switch lanes so the GoPro ended up on the wrong side to see the opponent... This was against a 14 Challenger SRT 392 with a catback. I ran an 8.46@ 84.5 in this pass. Best of the...
  8. B

    Hoosier releases new 18" DOT drags

    Saw a guy running this tire last night on a turbo Chevy Silverado, but in a different size. They seemed to perform very well and he said he is pleased with them overall. Did some research and found they make them in a 325/45/18, which is a 29.5" tire. Summit has them for 265 shipped, but...
  9. B

    8 speed crew cab driveshaft specs? Looking for aftermarket...

    I'm finding tons of aftermarket, high torque capacity one piece shafts online for 2500 4x4 rams, and a few for 1500 4x4 rams, but nobody specifically mentions fitment on a 2wd,let alone a 2wd 8 speed. Local DS shop quoted a ballpark of 1600 to "make the first one they've heard of". Anybody...
  10. B

    DIY wire harness connector repair

    Accidentally ripped a wire in half and ripped both wires out of a fuel injector connector today at work, and remembered how many times I've had to do this for other people that did the same when doing their own work. I've also seen the horrors that pass off as "repairs" that some people make...
  11. B

    Nitrous Install info, parts list, jetting charts, tuning help

    I'm gonna try and consolidate the info for nitrous installs on the 4th gen rams, since so many people ask the question but quickly get dissauded due to lack of answers. Hopefully, everyone that has something to contribute will do so, and we can localize this into one place. PARTS SOURCES...
  12. B

    7.85 1/8 mile pass in my 14 crew cab

    Took the truck out for test n tune. 14 5.7 crew cab 8 speed 3.21 gears, K&N with element removed, mufflex delete, hemi fever nitrous tune, nitrous outlet x series spraying a 150ish shot, nitto NT05Rs 315/40/18. Made about 10 passes, 8 of which under 8 seconds, with the best of the night being...
  13. B

    Denso 3381's after 1800 miles of daily driving

    Oh would ya look at that? They're just as clean as when I put them in, and don't loom much different than when I pulled them after passes at the track... The nitrous is running at 11.5 AFR, and running strong, good clean plugs at the end of the runs with no signs of too much heat. So I...
  14. B

    Brace yourselves....

    Kit comes in tomorrow, having wideband bung welded in today, getting plugs today or tomorrow, gauge pod for wideband comes later this week. Hopefully gonna make my first pass this friday.
  15. B

    Are there any crew cab 8 speeds out there on spray?

    Been talking with Matt, gonna be ordering a nitrous kit when this months bonus comes in. Already have the wideband in place to monitor AFR, gonna be running the nitrous outlet brand x kit. I bought a set of 4 lightly used nitto nt05 R radials 315/40/18 for 200 bucks, getting wheels For them...
  16. B

    Trinity keeping gauges on?

    I finally got the time to sit on hold forever with diablosport and they unlocked my tuner for me. Before, I didn't leave it in the truck, now I want to but it leaves my gauges on. I saw it in another thread that you just change some settings, but I can find neither that thread nor the...
  17. B

    Dealer reprogrammed ECM and tune feels like it's gone now

    Took the truck in t dodge for a few warranty concerns, and forgot to Uninstall the tune. They didn't notice it, but they did reprogram the ECM and it seems to have flashed over the tune. I wanted to confirm there will be no damage done if I attempt to reload the tune, since as far as the...
  18. B

    Removing PlastiDip from paint?

    Recently purchased a 14 CCSB Black Express used, previously owned by some kid/retard who decided it would be beneficial to plastidip the hell out of everything on an already blacked out truck. I got it all off the wheels with a pressure washer, but this retard decided to do the door handles, and...
  19. B

    Nitrous tuning question

    Well I know ive been discussing longterm cam/heads plans and such, but for right now that level of money is not in the cards. But, something for a nitrous setup can be done. I just have a few questions. I need it to be reliable, but most of all SAFE. I can't risk blowing this thing sky high...
  20. B

    another cam question

    Got to browsing around again and started looking at PPP's cams since I'm most likely going with their heads. They have a cam that has the same duration as the 268 but with a little more lift, on a tighter LSA. It's 216/220 .562/.560 112LSA. Nothing too extreme, the 268 is 216/220...
  21. B

    Traction?

    Does anyone actually get these things to hook on street tires? I've never driven something that refused to move off the line more than this truck. I made 12 passes last night at test and tune and my times were all over the place because it can't seem to not reduce my tires (or tire, rather)...
  22. B

    SRT Max cam

    Out on lunch today I ran into a guy with an 06 RCSB running the Inertia SRT max cam, ported heads, LT's, 3000 stall converter and 4.56's on a true trac. That thing is mean, yet still has a good idle (750ish) and according to him is very streetable. Its a .556/.566 lift 218/223 duration on a 112...
  23. B

    Thanks to Matt and Sean!

    I saw everybody buying friggin torque converters, and last week I caved in to peer pressure and bought a 2800 stall edge, stage 3 VB, mag-hytec deep trans pan, and a diablosport trinity. Matt got me taken care of and everything shipped quick(tuner shipped same day!) The trinity was first to...
  24. B

    calling anyone who has installed a va,ve body/TC in 545RFE

    On average, how much fluid does it lose when doing a valve body and torque converter, for those of you that have done it? I can get royal purple ATF4 for about the same price as valvoline syn on the shelf at oreillys, but its not near work so I need to know how much to bring with me. I...
  25. B

    Bundle discount?

    So all the progressive commericals got me thinking of how you guys should totally cut me some kind of bundle deal if I buy a 2800 stall converter, stage 3 VB, and a mag/hytec pan all at the same time...:favorites13:

Latest posts

Members online

Total: 1,080 (members: 39, guests: 1,041)
Robots: 1,717

Forum statistics

Threads
196,501
Posts
2,882,785
Members
157,866
Latest member
Kethsrn

Share this page

Top