Search results

  1. Ramrebel426

    Ride height with AlfaOBD (air suspension)

    Update I have pulled on the nitrogen out vent all bags to atmosphere started all over when truck is on it will not run any test at all just says limp home active. If truck is on ACC I can personally run a few test mainly add nitrogen back into the bags so it's not looking like a low rider but...
  2. Ramrebel426

    Alfaobd limp mode

    Won't run hight check because it says limp home activated
  3. Ramrebel426

    Fuel gauge not reading

    Yea I thought so too but wiring is good test it many times and it is connected because I am able to drive around.
  4. Ramrebel426

    Fuel gauge not reading

    I have a issue with fuel gauge not reading I have gone thou every thing at lease 8 times I bought a new fuel level sensor and drop the tank and installed it I test the old one and it was reading ohms both was reading 59ohms as I move the level sensor it would go up to 999 ohms no dead spots so...
  5. Ramrebel426

    Alfaobd limp mode

    Update Ok I was able to get the truck to raise up If I was in ACC and not Run it would let me temporarily bypass limp by letting me fill springs from the reservoir so I could get it off ground but on ACC and some of the settings limp home would still pop up. I think this is from the abs...
  6. Ramrebel426

    Air suspension problems!

    Can you give more details on how you got out of limp home mode. Resetting the in planet doesn't seem to be working for me. I pulled a vacuum to 800 microns and charge to 175psi on nitrogen. Non of this system to be working
  7. Ramrebel426

    Alfaobd limp mode

    My stepson stepped on top of the front airbag and broke the 90° adapter. I bought a new one and installed it. Add nitrogen back to the system and went through the whole process deal but I missed a valuable step. When I did the programming I did a programming on off-road one when I should have...
  8. Ramrebel426

    Alfaobd limp mode

    Post in thread 'Air suspension problems!' https://www.ramforum.com/threads/air-suspension-problems.193539/post-2740921. Thanks but i did all this and still in limp mode
  9. Ramrebel426

    Alfaobd limp mode

    Neg that didn't work
  10. Ramrebel426

    Alfaobd limp mode

    Perfect i will try this tonight and let you know i have tired everything but this maybe it work. I know the last few times i did hcc it says limp home status, active
  11. Ramrebel426

    Ride height with AlfaOBD (air suspension)

    Can anyone help me get the air Suspension out of limp home mode. I cant do anything with the alfaobd app on the suspension cant raise or lower, truck just had a motor swap one of the guys step on the top of the air bag when working on the swap long story short i all ready fix the suspension...
  12. Ramrebel426

    Alfaobd limp mode

    I have search everywhere only thing i come close to is someone talks about limp mode on a diesel which mine is not. They were talking about resetting DPF which I don’t have
  13. Ramrebel426

    Alfaobd limp mode

    Ok i am stuck been stuck on this issue for a while I have a very heavily modified 2016 ram rebel with a 6.4 426 stocker long story short is after the swap i cant get the air lift suspension to work i go in the alfaobd to fix the suspension but when i start any thing on the suspension...

Latest posts

Staff online

Members online

... and 4 more.
Total: 1,301 (members: 54, guests: 1,247)
Robots: 1,778

Forum statistics

Threads
196,498
Posts
2,882,733
Members
157,860
Latest member
pennysweat50

Share this page

Top