Search results
-
J
P1389 Help!!
Have a no start with a P1389 code. ASD relay is functioning and is staying closed when cranking but still have no start. good continuity to pin c2 and c12 to pcm. I am at a loss. Can anyone help me figure this out please? -
J
dakota transmission in 1500
can i put the transmission from a 05 Dakota transmission into a 07 ram 1500? is the same transmission with same bolt pattern but someone told me the wire harness might be different. Does anyone know if it would be a straight swap or is there more to it than that? any information would be greatly...- Jaywalla
- Thread
- Replies: 4
- Forum: Engine & Performance
-
J
misfire troubles
I have a 01 1500 with the 5.2 and 115k . I slowly been doing work on it getting everything straight. I recently changed the plug wires, dis cap and rotor and changed the oil/filter. since ding this i have been getting a misfire on cylinder 8 but only under load. I hear a ticking when it does...- Jaywalla
- Thread
- Replies: 1
- Forum: General Discussion
-
J
Death wobble 01 1500
Tie rod ends are pretty new, I changed the track bar and sway bar links and bushings, got new tires and had them balanced. I only feel the wobble very softly and it always goes away almost immediately. I am going to do some ball joints and get an alignment and have the rotors spun and i think...- Jaywalla
- Post #10
- Forum: General Discussion
-
J
Death wobble 01 1500
Its welded to the frame and is solid now and move and it did help significantly but i still have a bit of a wobble. I had to try to get the wobble going where before the weld it was unavoidable, and it isn't near as violent as it was before. I know my wheels and tires are way off balance too but...- Jaywalla
- Post #6
- Forum: General Discussion
-
J
Death wobble 01 1500
I just got the truck and am still working on getting tires so test drives have unfortunately been made with 36 12.50 16's on the back and 265 75 16's on the front, i think that might have amplified the death wobble. I got someone coming to weld the bracket on for me today. crossing my fingers...- Jaywalla
- Post #4
- Forum: General Discussion
-
J
Death wobble 01 1500
The damper seems good. its been upgraded and seems strong. I hope welding the track bar mounting bracket fixes the problem. its the only place a see any play in the steering.- Jaywalla
- Post #3
- Forum: General Discussion
-
J
Death wobble 01 1500
Got a bad death wobble. checked everything out and aside from the sway bar links everything looks tight but sway bar links shouldnt cause death wobble. it has a lift with a drop bracket for the track bar. when i turn the wheal the bracket moves slightly. Im having it welded ini place to...- Jaywalla
- Thread
- Replies: 9
- Forum: General Discussion
-
J
How high is this lift kit?
Just bought this truck and was wondering if anyone can tell by looking at it what size lift was put on it. I think a 6 maybe a 8
