Replace Spark Plugs

[themattman]

So it's been 30k miles and I need to replace the plugs in order to keep up my lifetime extended warranty. The truck is a 2009 5.7L Hemi with the Laramie trim. I've already made my peace with it... But before I get started, does anyone care to walk through it with me and give me some pointers? I want to baby this truck and make sure I do it the right way...

Thanks in advance,
-Matt

 

[adamwilkes14]

is it that much different than in a 3rd gen Hemi? If not your answers are found here:

http://www.ramforum.com/f76/spark-plug-change-diy-2163/

 

[KGBIGCOUNTRY]

I believe its the same as the 3rd gen but only difference is the intakes. Check your book for the part number for the plugs and welcome to the forum.

 

[adamwilkes14]

And make sure your engine is cool before changing them....and use anti seize on them...and take your time...

 

[themattman]

Ok, thanks! I am getting the stock NGK plugs from the dealer (strangely enough it's the only place that has em). I've heard you need a combination of extensions & swivels, and yes, I'm planning on using anti-sieze for sure. Any secrets to get to the back ones? How about the coil pack? Any part of the job a major pain or is it pretty standard 1-2Hr procedure?

 

[adamwilkes14]

NGK are good plugs...same as Ac Delco...NGK makes the Ac Delco plugs, I know a guy who works up in one of their plants...same exact plugs...

 

[03MopaRamman]

Hey welcome, that DIY by John is right on the Money!

 

[AlTheKiller]

i change them out just about every day. its super easy but yes the back ones are a pain in the butt and a swivel extension will help. i can knock out a hemi in probably 20-30 minutes using hand tools. the 4.7 is actually more of a pain than the hemi :****sweak:

its very straight forward though. if youve done them in the past on any vehicle its really no different

 

[0212353]

hit up Myoung - I know he just bought some plugs, not sure if he's done the job yet though. He's got a 4th gen 1500 as well.

 

[quietpeen]

so do the 4th gens use the same champion copper plugs as the 3rd gens?