Air Suspension Part Identification

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dorsai007

Junior Member
Joined
Apr 12, 2024
Posts
1
Reaction score
0
Location
Orlando, Florida
Ram Year
2018
Engine
Hemi
Edited to say that I've figured out it's called the Reservoir Manifold Part # 68204966AA. Fingers crossed it's not too much of a pain in the ass to swap out when it arrives in a few days.


Howdy all,

I've completed an exhaustive search through the forums and paid for the AllData service manual and still can't identify the part on my air suspension I know is bad. Basically, the part labeled 4 is stripped out because my fitting and hose are no longer screwed in and whenever I try to screw it back in it simply pulls free, or as I discovered will blow out under pressure when I attempted to refill the system.

Since that's a known bad part I'll start with replacing it but for the life of me I can't figure out what it's called, a part number, nadda. Every suspension system parts diagram fails to show it and while I took this pic from the all data the text doesn't mention what #4 is either.

I'd be grateful if anyone can point me in the right direction.

Cheers,

Marty
 

Attachments

  • Screenshot 2024-04-12 133003.png
    Screenshot 2024-04-12 133003.png
    652.8 KB · Views: 22
Last edited:

steveir

Junior Member
Joined
Jul 27, 2024
Posts
1
Reaction score
0
Location
Canada
Ram Year
2017
Engine
5.7 Hemi
Can you please point me to the location that your attached picture originated from.
Thanks
Steve
 

Daniel12

Member
Joined
Feb 11, 2022
Posts
63
Reaction score
43
Location
Toronto
Ram Year
2017
Engine
HEMI 5.7L
Can you please point me to the location that your attached picture originated from.
Thanks
Steve
I’d say the back passenger corner of the truck where the compressor is mounted
 

jr27236

Senior Member
Joined
Nov 11, 2019
Posts
498
Reaction score
423
Location
New York
Ram Year
2016
Engine
5.7 Hemi
Reservoir manifold
 

Attachments

  • Screenshot_20240813-222740.png
    Screenshot_20240813-222740.png
    371.8 KB · Views: 4
  • Screenshot_20240813-215718.png
    Screenshot_20240813-215718.png
    129.3 KB · Views: 4

jr27236

Senior Member
Joined
Nov 11, 2019
Posts
498
Reaction score
423
Location
New York
Ram Year
2016
Engine
5.7 Hemi
Did you attempt to tighten it? Because the body is made of plastic (the reason why it's cracked). Why they couldn't just make it out of a block of aluminum is rediculous
 
Top