Search results

  1. S

    Bilstein 6112 vs Dobinson IMS on the front

    As the title states, im looking at different leveling shocks for the front of my 13 ram 1500 4x4. I currently have 5100's set at 2.1 lift, 35 Nokian Tires. They're decent shocks. I drive mostly highway for work, but do some rough riding on the weekends, nothing exceptional. I find the 5100s are...
  2. S

    Rear Springs upgrade

    I was mistaken. My front is set at 2.1. But either way, I'm looking to sway bars, new body bushings, because I can see mine are pretty worn. Also maybe lowering the front to 1.4 and changing the springs all around.
  3. S

    Rear Springs upgrade

    Okay so I've got a 2013 1500 with bilstein 5100s all around. Leveled up front at 2.8. I've recently added a bed rack with a roof top tent and some stuff attached on the sides. Everything is roughly 375 lbs give or take 50 lbs maybe. Not exactly sure, just guessing. My rear for the most part...
  4. S

    BCM Programming 2013 Ram 1500

    Yeah, it seems like it's isolated to the driver door harness somehow. Everything else connected to the BCM works. So either a wire or a connector is messed up. Now I'm just trying to find the harness for sale. Dealer wants like 500 for it.
  5. S

    BCM Programming 2013 Ram 1500

    Yeah the scanner can do that. But nothing in the driver's door. Can get the passenger to work but no driver again. Seriously running out of ideas.
  6. S

    BCM Programming 2013 Ram 1500

    Aftermarket radio, but that side of the harness is good. Passenger door and everything works fine. Radio works great. Only thing that has an issue is the drivers door. I have LED turn signals and get the bad turn signals warning, but they do work. Had an old dealer tech come out and...
  7. S

    BCM Programming 2013 Ram 1500

    Interesting. Mine starts and runs just fine but as usual no power to the driver door. I did some fiddling around today, disconnecting the negative and back. Drivers window worked once then stopped again. Still starts though but no power again to the door. Key will also lock and unlock the door...
  8. S

    BCM Programming 2013 Ram 1500

    Yeah I got two actually for the driver door. It didn't do anything.
  9. S

    BCM Programming 2013 Ram 1500

    So the buttons light up. At least they did last night. But no power to the mirror or window or lock button. But surprisingly the speaker works. Checked the wires and all are good. I'm really wondering if for the reason that side of the BCM just quit or if the TIPM decided to die from that point...
  10. S

    BCM Programming 2013 Ram 1500

    Well, I replaced the door module, temp sensor, and reset the system. Got nothing, I'm at a loss and have no clue what it could be. Essentially I have no power to the driver door. No light comes in when I open but does with the other doors. So I'm just confused. I could replace the BCM but the...
  11. S

    BCM Programming 2013 Ram 1500

    So I got the AlfaOBD and Cable. Saved my logs and all that. Ordered a used BCM which I'll get tomorrow I believe. Guess I'll use my friends garage and just start looking at all the connections. I'm really thinking that after I switched all my tail lights, signals, etc to LED bulbs it just messed...
  12. S

    BCM Programming 2013 Ram 1500

    Hey, thanks for the advice. I did clear the codes a few times but they would come back after a little bit of driving. It all started after the snow here in Virginia. So I was thinking a wire or maybe water got into a plug or something. Not quite sure, however the shop checked all the normal...
  13. S

    BCM Programming 2013 Ram 1500

    So I've got a few electrical issues going on. Couple of codes thrown which just come back once cleared. Such as "Loss communication with door module A". And some other ground issues. Well, took it to the shop and all grounds are good. Tech thinks the BCM is bad. I can't get a new BCM from Dodge...
Top