Search results

  1. ezmoney

    Wobble in the rear after 2/4 Belltech?

    I understand. I have a heart condition and when I installed my belltech kit in 100 degree temp, after putting the front shocks on, I decided I would leave the stock shocks on in the rear, for now atleast. I'm thinking about getting QA1 shocks.
  2. ezmoney

    The stages of my drop

    I got no wobble up to 90mph (in Mexico). Haven't gone any faster than that. I got kind of a mix matched belltech kit. I got it used with street performer shocks for $300. The guy said he had it on his truck for 6 months and decided to go lower. It did not come with front bump stops. I bought...
  3. ezmoney

    Wobble in the rear after 2/4 Belltech?

    Did the brackets fix your problem?
  4. ezmoney

    2013 Big Horn

    I plan on a 6.4 intake swap in the future but can't afford it at the moment, so I ported my 5.7 manifold. It cost 0 dollars. I already installed a less restrictive muffler, Vararam, 87mm ported throttle body, and a throttle controller. I think they all work together like synergy. My truck runs...
  5. ezmoney

    Synthetic Oil

    I am planning on changing it in 5k miles, but your advice is much appreciated.
  6. ezmoney

    Synthetic Oil

    I've had my truck about a year and I have just been taking to the drive through oil place and what ever oil they put in it is what I got. Recently I've started doing some upgrades and preventative maintenance to my truck. I've decided to change the oil myself from now on. Truck has 149k miles...
  7. ezmoney

    Donut Switch

    I installed this switch today. It disables abs, stability control, and traction control. I probably won't use it, but like having the option of turning off those systems with the flip of a switch. It was just some connectors, wire that I already had, 30 amp fuse, and a $5 toggle switch from...
  8. ezmoney

    What did you do with your 4th Gen this week?

    Moe's Performance has what you need to do the swap.
  9. ezmoney

    Aftermarket Valve Covers

    I plan on getting a 6.4 intake but don't think it will be anytime soon. I will probably get headers and a tune before the intake.
  10. ezmoney

    Aftermarket Valve Covers

    I'm going to use the leg maker from Moe's
  11. ezmoney

    Aftermarket Valve Covers

    I never said that I wasn't going to get a 6.4 intake. How about I waste my money on both, an intake and valve covers.
  12. ezmoney

    Aftermarket Valve Covers

    What are the pros and cons of aftermarket valve covers? Besides appearance, are there any benefits? I've seen some billet aluminum covers that look cool but I don't want something that holds in more heat or prevents proper lubrication or something harmful. I wouldn't mind finding some orange...
  13. ezmoney

    5.7 with 6.4 cam and intake makes no bottom end

    If I get the 6.4 intake from Moe's and put it on my 5.7 will I lose bottom end power like op did, or is it the cam that is causing his problems?
  14. ezmoney

    Big ****** grin 392 swap

    That thing is going to do big burn outs all the way down the street!
  15. ezmoney

    The stages of my drop

    I first decided that I wanted to lower the rear about 2" to level it. I didn't want to take too much off so I started by cutting 1.5 coils(Top pic).Then I drove it about a week and decided it needed to come down more so i cut another 0.5 coil off for a total of 2.0 coils(2nd pic). It still...
  16. ezmoney

    Belltech bump stops

    Do you have a link? Are they available online?
  17. ezmoney

    Belltech bump stops

    Sounds like if there were problems with the Inez no cut kit, it's likely this Trekline kit may have problems also. I am interested in installing relocation brackets so I can get an idea of how they work, there strengths and weaknesses. I'm a retired millwright/welder and army tank mechanic...
  18. ezmoney

    Belltech bump stops

    No cut kit. The description says 1"-4" drop only, will not work for 5"+ drops. I didn't measure mine but I think it's about 4.5" or 4.75". Maybe I will try these brackets. https://treklinemotorsports.com/8003404/09-18-ram-1500-4-link-rear-bracket-relocation-kit-no-cut-for-4-drop/
  19. ezmoney

    Belltech bump stops

    Trekline motorsports sells no cut brackets. Are they no good?
  20. ezmoney

    Belltech bump stops

    Ok, I will get the brackets. If I get the cut brackets, does that mean I drill less holes, as I would with the no cut brackets? What's the difference in cut or no cut? Is one better than the other?
  21. ezmoney

    Belltech bump stops

    Thanks for the advice. I may get the relocation brackets. I think that I read in another thread that you recommend the brackets instead of replacing control arms because someone replaced conrol arms and it didn't fix the problems he was having until he installed the brackets. I wonder if he had...
  22. ezmoney

    2013 Big Horn

    Is there anything I can do to make the 6 speed transmission last longer, besides the way I drive it? Torque converter, shift kit, 4.10 gears, will any of these things help to prolong the life of a 6 speed transmission?
  23. ezmoney

    Belltech bump stops

    Yes I left the factory bump stops inplace. I ordered these bump stops. I might trim a little off of them. This is how the truck looks with the belltech kit installed. I am thinking about cutting one coil off the rear springs to make it more level.
  24. ezmoney

    Detailing: How to Debadge/Favorite Method

    I used fishing line. Then I sharpened the edge of an old credit card to scrape almost all the adhesive off. The plastic won't damage the paint. Then cleaned the rest of it off with rubbing alcohol and a rag.
  25. ezmoney

    Throttle controllers; Worth it? Generic controller vs Name brand?

    The Speedform throttle controller only costs $60.

Latest posts

Members online

Total: 319 (members: 10, guests: 309)
Robots: 619

Forum statistics

Threads
198,907
Posts
2,911,900
Members
161,823
Latest member
Meteleskum

Share this page

Top