Search results

  1. M

    broken wiring harness connector for projector headlights

    Those connectors require special tools. Check this out...
  2. M

    broken wiring harness connector for projector headlights

    Are you wanting to de-pin the orginal connector?
  3. M

    Need electrical connector

    This truck is my special project. Once I decided to keep it I had all 5 wheels brake calipers, rotors and wheel bearings replaced. Then moved on to water pump, power steering pump and coil packs, and spark plugs. A month later I replaced the alternator, put in dual batterys, cold ait air with...
  4. M

    Need electrical connector

    Thanks for the suggestion. A generic trailer connector is about 3/4 to 1 inch in diameter. The plug in to the electric motor on the fan is about 3/16 to 1/2 inch in diameter. and is oval in shape. I will check out the possiablity of making it work. Thanks again, Medicineman
  5. M

    Need electrical connector

    Hello everyone, I haven't posted in quite a while. I am looking for the electrical connector that connects directly to the evaporator fan motor of the air conditioner condensor. I have a 2005 Ram 1500. Has the A/C system as most Ram and other products. My A/C stopped working properly and I...
  6. M

    2010 radio works cd doesn’t

    I had this happen and couldn't resolve it. I bought a NEW radio / CD player and installed it, which worked fine. I sent the removed one to a certified repair shop and had it repaired and now sits in a box waiting for the newer one to crap out, then I will do the exchange and repair again. I too...
  7. M

    CB Radio Issue

    How about this. Wire the radio directly to the battery. What I mean is run a # 12 wire with positive and negative leads, such as a speaker wire direct to the battery and connect it to your radio. I am retired now but have massive experience installing commercial radios into all types of...
  8. M

    University of Utah NIL collective gifts brand-new Dodge Ram 1500 trucks to all 85 scholarship football players

    WOW !!!
  9. M

    Anyone have experience with these lights

    Hello Guys, I have these lights, purchased from Amazon, on my truck. My advice to you is that if you do not have a basic understanding of low voltage lighting and wiring enough to perform the installation and modify the system so that the error codes do not show just stick with OEM products...
  10. M

    Has anyone experienced this battery issue before?

    Check alternator, and the reason the things were going crazy was because of low voltage.
  11. M

    LED upgrade complete, now throwing multiple errors

    Sounds like you have some sound advice here from responders. I will give you and others planning changes like this and that is to know a little bit about canbus systems, which you can learn over the internet and always use resistors on non modified canbus systems. Yo should never have problems...
  12. M

    Government trying to hunt me down

    Ok, Cut the red wire. Then locate the antenna wire and cut it. Then you should have 3 wires. Use a volt ohm meter to locate the ground, in case it isn't black. Which ever colors of the two remain connect them together, restoring the ignition. Job Done.
  13. M

    Converting to LED Headligts?

    In my 2004 I replaced the entire headlight set. I have HIDs in the low beam projectors and LEDs in the high beams. Don't remember the brand, but bought them on Amazon. They work fantastic.
  14. M

    OEM Battery Life

    My 2004 RAM with 4.7 made it to 88 K on original battery. Replaced with two Yellow top AGM batteries. Had to remove the OEM air intake and add a battery box rack on the right side and run some 2/0 cables and hook it all up. Here in KY we have all types of weather, but the AGMs have lasted to...
  15. M

    Power steering nightmare

    I have a 2004 and replaced the pump. It had a very slight whine, so my mechanic replaced fluid with synthetic and added about 2 ounces of Lucas engine oil treatment. No whines working perfect for over 2 years now. Truck had 166, 000 at change and now had 175,000.
  16. M

    Just did the H11 to H9 conversion.

    Sir John, No insult intended. There are many types of ferrite materials and some do not insure the desired outcomes. I don't know if you tried installing with the radio on and tuned to a distant station or not. That is what I did, I disconnected one side of the lights at the transformer and...
  17. M

    Just did the H11 to H9 conversion.

    Here are photos showing what the part looks like and where the placement is. I have a set of lights for a friends truck, so I showed the placement with them laying on a table. The first pic is showing placement on my 2004 ram 1500. If you look close you can see two ferrites the one in the...
  18. M

    Just did the H11 to H9 conversion.

  19. M

    Just did the H11 to H9 conversion.

    Ok, Did you use the exact part number ferrite? The ones that I use simply clamp around the wires, install is a no brainer. The distance is not critical from 2 to 4 inches should be sufficient. I have used this method on various HID installs and one install that was OEM, but was giving...
  20. M

    Just did the H11 to H9 conversion.

    I love my HID s.As far as reliability, I have not had the first issue. When I decided to keep my 2004 and not trade I went with a custom paint job, new wheel bearings, rotors, calipers all around. New universal joints and also a complete AC rebuild, all components including fans, radiators...
  21. M

    Just did the H11 to H9 conversion.

    Well, I had changed out the OEM light housing for ones specific for HID. Not that expensive and look really great, neither are the HID lights are not that expensive. The look and operate fantastic. You simply get what you pay for in looks and performance.
  22. M

    Just did the H11 to H9 conversion.

    HID radio interference cure. I just looked up the part numbers for what you will need to cure the problem completely. When I installed HIDs I could not hear anything but the closest stations. To cure the problem order two part number 17842FL ferrite chokes for each HID bulb you need to quite...
  23. M

    Just did the H11 to H9 conversion.

    HI guys, All who are interested, the HID conversion is simple and consistent. I have had mine since 2012 on my 2004 1500 4x4 with no faults, no bulb replacements and I have the cure for the radio interference. I can advise anyone interested just what to do to stop the RFI. It is a simple...
  24. M

    A/C Hepl Please

    Oh yes, all components were replaced NEW, no rebuilt or used parts. Thanks, Medicineman
  25. M

    A/C Hepl Please

    Hello, Yes, the serpentine belt and tensioner was replaced prior to the AC system. The AC system has had a major overhaul, including a new compressor, new pressure switch, new accumulator, new tube, new AC radiator and attached electric fan. The new system was installed by an ASE certified...

Latest posts

Staff online

Members online

Total: 1,329 (members: 50, guests: 1,279)
Robots: 1,466

Forum statistics

Threads
196,497
Posts
2,882,706
Members
157,854
Latest member
tezell1972

Share this page

Top