2014 2500 4wd actuator plug schematic

[Chris Kenlan]

I have been having an intermittent Serv 4wd indicator which I have narrowed down to the front axle wiring or actuator (C1464). Does anyone have the pin layout for the actuator plug. I have already disconnected cleaned the contact and added some dielectric grease but the problem keeps coming back intermittently. I would like to prove all the wires before I replace the actuator. Thanks
2014 - 2500 Ram Tradesman
387,000 miles and still going!!

 

[jawzs2]

You can get the pinouts here - do a search for axle and it should give you a few choices

https://connectorrepairkit.mopar.com/

 

[Chris Kenlan]

You can get the pinouts here - do a search for axle and it should give you a few choices

https://connectorrepairkit.mopar.com/

Thanks, just what I need. Great source!

 

[Chris Kenlan]

Update, problem solved. Found 2 compromised wires leading from the actuator. After a little solder and shrink tube all is good. I found this very helpful diagnostic procedure on the forum but don't know who to thank for it , I lost the thread. Thanks for the pin sheet, also very helpful! Thanks Jawzs2!!