Ecofx86
Senior Member
Finally The Build is complete!! I call it the Kicker/Alpine 900 watt up Build. Total cost is roughly 1100 dollars for 900 watts. Below is the list of items involved in this build. You can crank it wide open no distortion! Its budget build that Rocks for Sure!!
*Head Unit 8.4 Stock*
WIREHARNESS TO GIVE SIGNAL FOR AMPS
https://www.netaudiowf.com/product/2013-18-dodge-ram-amplifier-ready-t-harness-with-load-resistors/
AMP KIT 4 GAUGE
https://www.amazon.com/gp/product/B0050I6KII/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
DISTRIBUTION BLOCK
https://www.amazon.com/gp/product/B07D1JLN8N/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
*Dash Speakers*
KICKER 3.5 KS
https://www.crutchfield.com/p_206KSC3504/Kicker-44KSC3504.html
BASS BLOCKERS
https://www.crutchfield.com/p_007BB600/Crutchfield-Bass-Blockers-600-Hz-cut-off.html
* Front Doors*
KICKER 6.5 DS
https://www.crutchfield.com/p_206DSC6504/Kicker-43DSC6504.html
MOUNTING BRACKET
https://www.crutchfield.com/p_142SA69/Scosche-SA-69-Speaker-Mounting-Brackets.
* Rear Doors*
KICKER 6X9 DS
https://www.crutchfield.com/p_206DSC6904/Kicker-43DSC69304.html
*SUBWOOFER*
KICKER COMP R (500 WATT RMS)
https://www.crutchfield.com/p_206CWR124/Kicker-43CWR124.html
FOX ACCOUSTIC 12" VENTED PASS SIDE
https://www.foxacoustics.com/ProductDetails.asp?ProductCode=DQC-112-V-P
*AMPLIFIERS*
ALPINE S-A32F 4 CHANNEL
https://www.amazon.com/Alpine-S-A32...refix=alpine+4+channe;,electronics,174&sr=1-5
SPEAKER WIRE TO RCA ( DIDNT HAVE HIGH INPUT HARNESS)
https://www.crutchfield.com/p_136XDCLR2S/JL-Audio-XD-CLRAIC2-SW.html
ALPINE MRV-M500 MONO BLOCK
https://www.amazon.com/gp/product/B00BMR7UPS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
ALPINE RUX-KNOB2.0 BASS CONTROL
https://www.crutchfield.com/p_500RUXKNO2/Alpine-RUX-KNOB-2.html
I'm pretty sure u can save money on the harness, but I was being lazy and just wanted something to plug n play with no worries. I wanna Thank everyone on this forum that help me out with all the information!! I'm sure if I did it all over I would have went with the KS 6.5 and 6.9 instead of the DS. At first I just wanted to do stock replacement than the bug hit me! lol I wanted more soo yeah amps n sub came into the picture. I also originally had the DS 3.5 but I got lucky n sold them to my buddy with a 2019 Ram! The DS doesn't sound nearly as good as the KS 3.5 on the amp. I have the frequencies set around 85 90hz for the mids n highs. The sub amp around 80 hz. If u not running a sub u can easily let the 6x9 run at 70hz to get some bass. The system with no amp sounded a lot better than stock but just not quite loud enough for me. Those DS speakers really sound damn good with 50 watts on them. For being low end speaker they get loud n clear! I mounted my amps on the back wall with some heavy duty Velcro! As long as u remove the insulation and directly mount the Velcro on the metal, you will have no problems of it coming off the wall. Power wire is ran on driver side and netaudio harness is ran on passenger side of truck. I get no engine noise and my amps come on when I turn the key so no need for remote wire! Easy Install and very pleased with this set up!
*Head Unit 8.4 Stock*
WIREHARNESS TO GIVE SIGNAL FOR AMPS
https://www.netaudiowf.com/product/2013-18-dodge-ram-amplifier-ready-t-harness-with-load-resistors/
AMP KIT 4 GAUGE
https://www.amazon.com/gp/product/B0050I6KII/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
DISTRIBUTION BLOCK
https://www.amazon.com/gp/product/B07D1JLN8N/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
*Dash Speakers*
KICKER 3.5 KS
https://www.crutchfield.com/p_206KSC3504/Kicker-44KSC3504.html
BASS BLOCKERS
https://www.crutchfield.com/p_007BB600/Crutchfield-Bass-Blockers-600-Hz-cut-off.html
* Front Doors*
KICKER 6.5 DS
https://www.crutchfield.com/p_206DSC6504/Kicker-43DSC6504.html
MOUNTING BRACKET
https://www.crutchfield.com/p_142SA69/Scosche-SA-69-Speaker-Mounting-Brackets.
* Rear Doors*
KICKER 6X9 DS
https://www.crutchfield.com/p_206DSC6904/Kicker-43DSC69304.html
*SUBWOOFER*
KICKER COMP R (500 WATT RMS)
https://www.crutchfield.com/p_206CWR124/Kicker-43CWR124.html
FOX ACCOUSTIC 12" VENTED PASS SIDE
https://www.foxacoustics.com/ProductDetails.asp?ProductCode=DQC-112-V-P
*AMPLIFIERS*
ALPINE S-A32F 4 CHANNEL
https://www.amazon.com/Alpine-S-A32...refix=alpine+4+channe;,electronics,174&sr=1-5
SPEAKER WIRE TO RCA ( DIDNT HAVE HIGH INPUT HARNESS)
https://www.crutchfield.com/p_136XDCLR2S/JL-Audio-XD-CLRAIC2-SW.html
ALPINE MRV-M500 MONO BLOCK
https://www.amazon.com/gp/product/B00BMR7UPS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
ALPINE RUX-KNOB2.0 BASS CONTROL
https://www.crutchfield.com/p_500RUXKNO2/Alpine-RUX-KNOB-2.html
I'm pretty sure u can save money on the harness, but I was being lazy and just wanted something to plug n play with no worries. I wanna Thank everyone on this forum that help me out with all the information!! I'm sure if I did it all over I would have went with the KS 6.5 and 6.9 instead of the DS. At first I just wanted to do stock replacement than the bug hit me! lol I wanted more soo yeah amps n sub came into the picture. I also originally had the DS 3.5 but I got lucky n sold them to my buddy with a 2019 Ram! The DS doesn't sound nearly as good as the KS 3.5 on the amp. I have the frequencies set around 85 90hz for the mids n highs. The sub amp around 80 hz. If u not running a sub u can easily let the 6x9 run at 70hz to get some bass. The system with no amp sounded a lot better than stock but just not quite loud enough for me. Those DS speakers really sound damn good with 50 watts on them. For being low end speaker they get loud n clear! I mounted my amps on the back wall with some heavy duty Velcro! As long as u remove the insulation and directly mount the Velcro on the metal, you will have no problems of it coming off the wall. Power wire is ran on driver side and netaudio harness is ran on passenger side of truck. I get no engine noise and my amps come on when I turn the key so no need for remote wire! Easy Install and very pleased with this set up!