FF376
Junior Member
So my sons 2nd gen (97) lost its low beam lights. Highs still worked. Checked the normal fuses and stuff and all good. If I moved the tilt column up they come on...move it down they go off. So pulled the column covers and knee bolster looking for wiring issues. Nothing. Start the wire wiggle testing. When I move the clock spring wiring they go off and on..... Not the multifunction switch but the separate wiring for the clockspring . now the clock spring has been noisy when turning so I ordered one but I can't find anything in the wiring diagram that shows why it would impact the low beams.... Anybody else seen this?