Recent content by 6speed4.7
-
For the guys who think deactivating the mds via a tune is a good idea
My 9-Drive has worked flawlessly for 3-4years It’s on its 2nd truck Has to be removed to install/uninstall a tune, learned that the hard way Cost hardly anything Canadian- bought locally Easily my most favourite mod, drive around winter/summer at max 3.9- 6speed4.7
- Post #203
- Forum: Engine & Performance
-
Option and Opinions on rear bags
I would agree with Crash, while the Air Lift 1000 bags worked great when they held pressure, the longevity definitely came into play with my lowered truck Air Lift stepped up and warrantied the 1st set that failed early in their life. 2nd set failed under a year, which I chaulked up to extreme... -
Issue with IHC 4/6 lowering kit ball joints.
Quick update on my IHC install Thankfully the taper of the ball joint, castle nut, cotter pin and hole all lined up at 110lbs torque Hopefully I’ll get an alignment appointment tomorrow and report back -
Issue with IHC 4/6 lowering kit ball joints.
Thanks guys the heads up and sharing I’ll let you know how I make out when it’s my turn -
Issue with IHC 4/6 lowering kit ball joints.
Hey Racer your post is timely Just cleaning my garage out to install an IHC 3/5 4x4 front control arm drop hopefully before Christmas Pulled lower control arms out and looked at the hole for the cotter pin on the supplied BJ castle nut Is there a difference in the factory one to IHC’s castle... -
Urgent Advice Needed. Limp Mode...
LOL, took you longer to write that than do Sherman’s test Definitely worth a try, the difference in cranking cadence may be obvious I get it that we all don’t have the experts ear…- 6speed4.7
- Post #32
- Forum: Engine & Performance
-
Timing gear and chain verification help needed
You may have a excuse for getting it backwards, see the below bulletin- 6speed4.7
- Post #6
- Forum: Engine & Performance
-
LOWERED ON 28INCH DRAG RADIALS
Nice truck 2WD? Back gap isn’t too bad, but I hear you on the front. Your lowering springs plus a spindle drop should get you 4”? Probably the easiest way- at your stage- to lower the front more Somebody correct me if I’m wrong Sidenote- picture of my 2wd 2x4 Belltech drop with a 30.5” tire-... -
Hemifever tune or bolt ons first?
I got my extra PCM that I sent to Diablo from these guys No core change, been in the truck for a few years with no problems- https://www.car-part.com/mobile/ Seems to be lots available in Florida area- 6speed4.7
- Post #114
- Forum: Engine & Performance
-
starting my drop project soon.......parts are on order
You’ve been collecting parts for a few years, glad to see it together How do you like the Timber Groves? -
OH MY KARUMBA
How much of that shipping? Recently it seems that the shipping costs to Canada from anywhere south of the border have been crazy Thankfully Winnipeg is 45mins to North Dakota and free US shipping- 6speed4.7
- Post #4
- Forum: Engine & Performance
-
ARH long tube installation
That definitely sounds doable I like the idea of doing a test run on one that you can see Thanks for the help- 6speed4.7
- Post #29
- Forum: Engine & Performance
-
ARH long tube installation
I definitely will I found it to be hardest part of the installation, over the broken manifold bolts/dipstick tube Sorry to hear it doesn’t get better on the Dodges Actually the hardest part has always been- getting my wife to put this at the top of her list of job’s needing doing- almost...- 6speed4.7
- Post #23
- Forum: Engine & Performance
-
ARH long tube installation
LOL Thanks Rick- no wonder nobody’s talked about it Spent more time than I’d like to admit working on the two on the drivers side Did find however, blasting all the road debris out of connectors with WD40 helped in releasing them Really hoping someone had a magic wand for this one Like you said...- 6speed4.7
- Post #21
- Forum: Engine & Performance
-
ARH long tube installation
Anyone have a tip on getting the O2 sensor connections apart located above the transmission? Looking at re-installing my ARH LT’s that I have removed before I sold my previous truck Separating the four sensor connectors that you can barely feel/see is the only thing that I’m really dreading on...- 6speed4.7
- Post #17
- Forum: Engine & Performance
