Search results

  1. X

    TPMS 433mhz vs 434mhz

    This is where the confusion starts. I agree and thought that the 433MHz would be what I need, but the ones listed for my truck have 434MHz on them. If you go to the superseded sensors part numbers, they revert back to 433MHz. I know this is what comes up when my VIN is imputed, but am I...
  2. X

    TPMS 433mhz vs 434mhz

    Yes that is what comes up when I search by VIN #.
  3. X

    TPMS 433mhz vs 434mhz

    I'm getting a set of aftermarket wheels/tires and I would like them to have TPMS sensors in them. I will run my OEM set in the winter.
  4. X

    TPMS 433mhz vs 434mhz

    Looking to buy some sensors for my aftermarket wheels, but the more I look the more confused I get. I read through the search results and found no answer. I have a 2022 Ram Classic with the 5x139.7 bolt pattern. On the Ram parts website and putting in my VIN it shows 434mhz on the sensors...
  5. X

    Vibration/Rumble from MDS or something else?

    I feel its the MDS. My 22 4x4 has done this since day one (bought new). While driving at about 40MPH, light throttle, I get the slight rumble. I also get a surging of about 300RPMs also. If I turn off MDS by the gear buttons or tow/haul it goes away. I never noticed this on the other 3 4Gen Rams...
  6. X

    TPMS woes...

    Sorry my bad. I overlooked it when reading.
  7. X

    TPMS woes...

    This is on a 2013, but he talks about his not working until he cleaned it. https://www.youtube.com/watch?v=N_8vFgGzASo
  8. X

    TPMS woes...

    Have you checked the module. https://www.youtube.com/watch?v=UEHLfl_gG6s
  9. X

    Last of the regular cab short bed

    Ordered mine in fall of 2021 as I was told they were done making them on Jan 1 of 2022. After having 3 previous Gen 4s in QC and Crew and being empty nesters, I got what I wanted. I ordered my 2022 4x4 because I wanted a CD player and limited slip rear-end.
  10. X

    20x10 -19 wheel poke

    Thanks for the replies. Think is a little too much poke for me, I'll stick with 9" wide and 0 offset. Had 18x9 0 ET wheels on the 2011 I had and 285/65/18 tires and liked the look.
  11. X

    Want to get new wheels

    Yes, your speedo will be off. Your stock set up (275/60/20) is a 33" OD tire and the other ones are a 31.9" OD tire.
  12. X

    20x10 -19 wheel poke

    So your thinking a total of 1 1/2", because I get to split the 2" in rim width difference in half?
  13. X

    20x10 -19 wheel poke

    I'm looking at this size wheel for my 2022 Classic Ram 1500 4x4. I have the stock 20x8 wheels with +19 offset and going to a 20x10 with -19 offset. Here is my math. A +19 to -19 will push the same size wheel out 1/2", then going from a 8" wide to 10" wide will push out the wheel another 2"...
  14. X

    Why is there a Classic?

    Bingo - The Classic is to compete with the smaller trucks as stated above in the price point, since the Dakota was discontinued. For me it was the only way I could get a brand new Reg Cab Short bed and I like the styling. The 5th Gen blended in with the rest of the trucks offered.
  15. X

    Bye Bye RAM!! Welcome Toyota Tundra!

    The dealership is not being helpful and I'm going to try a different dealership. The only way to get a Reg Cab is with the Classic body style, I found that the 2022 model year was going to be the last year for the Classic. They do not make a Reg Cab in the 5th gen truck. There was NO R/T package...
  16. X

    Bye Bye RAM!! Welcome Toyota Tundra!

    I agree with you 100%. If this would be a truck out of warranty, I would be checking all of this. BUT it is a brand new truck bought in Dec. 21 and has 7K on the clock. The trans issue has been a problem since the first cold start after delivery.
  17. X

    Bye Bye RAM!! Welcome Toyota Tundra!

    Just quick answers, I'm not writing a novel. No dip stick for trans, its a "lifetime trans" - Of the (4) 8 speed trans I've had this is the only one giving issues. Would think dealer would have checked fluid level. Gas peddle not touched when starting truck, yes motor revs up at cold start...
  18. X

    Bye Bye RAM!! Welcome Toyota Tundra!

    Okay 1. The truck acts like it has a clutch when cold. Goes into gear but slips/flairs till up to speed. 2. The truck shutters when trying to downshift. 3. When towing a trailer and trying to back up an incline (my driveway) it slips and takes a lot of RPMs 4. When towing trailer on highway at...
  19. X

    Bye Bye RAM!! Welcome Toyota Tundra!

    I understand your frustration. I am a life long Chrysler fan and have had 4 of these Ram trucks. I ordered a 22 Classic to get a Reg Cab short bed 4x4 and it is having major issues at 6 months and 7k. All dealer is telling me is I have a lot of warranty left, as there is no lights on dash and no...
  20. X

    Anybody running 17" bullet hole rims on 4th Gen 1500?

    Do you have any kind of lift on the truck and any rubbing? What offset are you running?
  21. X

    Anybody running 17" bullet hole rims on 4th Gen 1500?

    Thanks. That looks good. The tires are not too much sidewall and look to fit the fenders nicely. Is the Gen 3 stock or is there any lifting going on? Did you have any rub on the Gen 3? What were the specs on the rims?
  22. X

    Anybody running 17" bullet hole rims on 4th Gen 1500?

    Looking for anybody running the 17" polished bullet hole rims on a 4th Gen Ram 1500? Could you post a pics and details of the set up? Bonus points for white letter tires. Thinking of running them with 33" tires on a stock 2022 Classic 4x4.
  23. X

    Aftermarket wheels 18" or 20" what looks best.

    I had aftermarket 18x9" wheels and 285/65/18 tires on my 2011 Quad Cab 4x4 a few years back. I am now looking to put aftermarket wheels on my new 2022 Reg Cab Short bed 4x4 and I'm having a hard time deciding on which size wheel. The 18" look great on the Quad Cab, but I'm not getting that...
  24. X

    General ATx vs Cooper Discoverer AT3 LT

    I had the AT3s on the Colorado I traded in and ran one winter with them and had only one issue in winter. The tires gripped really well taking off and braking, but when turning liked to slide. Next tire I try will be the Grabbers ATx. I would like to add that I had BFG ATs and they were a...
  25. X

    Anybody found a cheap set of 4 TPMS Sensors (aftermarket is fine) that worked and didn't need programming RECENTLY?

    The ones I bought, were the OEM ones. And at the price I stated. I compared both the OEM and Ebay ones and they were identical. I even checked them when they arrived to make sure it was not one of those bait and switch deals. I must have gotten lucky.

Latest posts

Staff online

Members online

Total: 1,312 (members: 44, guests: 1,268)
Robots: 1,289

Forum statistics

Threads
196,205
Posts
2,879,050
Members
157,334
Latest member
Ramman69

Share this page

Top