Search results

  1. S

    replaced lower ball joints with moog question on greasing

    I replaced my OEM front lower ball joints with moog problem solver joints part #K500286. They have grease fittings on the tops of the joint that I am not familiar with. They are not the zerk fittings that I've used before. You can see a photo of them here (it is the second photo)...
  2. S

    another trans fluid change question

    For those of us that have caulk's bypass installed, what should the procedure be to check the level? It would take an hour of towing to get my temp to 122f. The last time that I changed it, I had to wait forever for it to get past 86f.
  3. S

    Air suspension problems in the cold

    I recently experienced an air suspension issue on my 16 Rebel for the 2nd time. It has been relatively cold this week in PA. Probably nicer than springtime in Otawa, but cold for us. I came out to my truck to drive to work and I received the service air suspension immediately warning on the...
  4. S

    What size oil udder

    I wanted to try an oil udder out for my next oil change. I see there are a few sizes. What size should I get? I use the larger royal purple filter. I already use a fumoto valve and a screw in funnel.
  5. S

    lubricate drive shaft on 1500?

    I've dealt with the transmission clunk and forward lurch when the truck downshift from 2 to 1 since I bought it. It has certianly gotten much better with a hemifever trans tune. I still do feel like the drive train could be smoother on downshifts. Does anyone know if we can lubricate our...
  6. S

    Edge Pulsar $350

    I have a used edge pulsar for a 2015-2018 ram 1500 with a 5.7 hemi for sale. The tuner worked flawlessly when I removed it. This really wakes up the hemi and adds horsepower and torque. You can switch between 8 power levels on the fly by using the cruise control buttons. I have the original box...
  7. S

    rear interior dome

    before I order an LED bulb for the rear dome of my 16 rebel, does it take a 42 mm or a 44 mm festoon bulb? I am finding conflicting information on which one it needs.
  8. S

    windshield washer not working in the cold

    I've been having an issue when I come out to my truck in the morning with frost on the windshield. I typically will give a quick spray with washer fluid to get rid of the frost if it's not too thick. Recently, my washers will not work in the cold. I did some searching and I read about the...
  9. S

    hemifever tuning advise

    I recently purchased a diablo I3 with hemifever PCM and transmission tuning. Once the necessary parts arrive, what should I request for my tune from hemifever. He is requesting if I'd like MDS disabled and what fuel that I intend on running. I've read that other ask him to raise the idle to...
  10. S

    Tire air pressure

    I have a 16 Rebel. The door sticker recommends 55 front and 45 rear for the air pressures. The truck came stock with Toyo Open Country A/T. I now have Falken Wild Peak's on there with an 80 lb. max. Should I stick with what the door label says or increase them closer to the max? I've been...
  11. S

    Brake light out warning after LED headlight install

    I recently installed low and high beam LED's from LASFit. The install went fine, but I occasionally get a brake lamp out warning in the dash. I purchased alfaobd and I made sure that all of the lights are LED. I still got the warning. The headlights work great with no flickering and I am...
  12. S

    Autotecnica HD replacement transmission pan

    I am staring to do the research of what I will replace when I do my first transmission fluid change. I noticed in a video that Dorman makes a pan that has replaceable filters. Upon looking that up on rockauto I noticed the Autotecnica HD aluminum pan with cooling fins and replaceable filters...
  13. S

    Lisle 71500 exhaust manifold template

    This past weekend, I started the daunting task of fixing snapped exhaust manifold studs during a shorty header swap. I watched many videos beforehand. Fortunately, I purchased the lisle exhaust manifold template before doing the job. I only found one stud snapped, but it made that extraction...
  14. S

    Broken manifold bolts/JBA shorty header question

    I own a 16 Ram 1500 Rebel. I have the common cracked header bolt dilemna after only 40k miles and I wanted to purchase shorty headers to keep this problem from happening again. I've narrowed my search to the JBA titanium ceramic shorty headers. My question is if you believe that the gaskets...

Latest posts

Members online

Total: 1,199 (members: 40, guests: 1,159)
Robots: 1,484

Forum statistics

Threads
196,044
Posts
2,877,156
Members
157,062
Latest member
Capdanger93

Share this page

Top