2002 RamNut
Junior Member
Replacing the entire front suspension with Mevotech upper and lower control arms w/ball joints, sway bar end links, and inner and outer tie rods, and Bilstein shocks. Looking for the torque specs for basically the entire front suspension on my 02 5.9L 1500. See attached pic for the type suspension I have as I guess there were a couple options, mine is a coil spring not strut.
Upper Control Arm to Frame -
Lower Control Arm to Frame -
Upper Ball joint stud -
Lower Ball joint stud -
upper end link nut -
lower end link nut -
sway bar to frame bushing bolts -
upper shock nut -
lower shock nuts -
2 - 21mm Caliper mount bolts -
20" factory wheels -
inner tie rod -
outer tie rod jam nut -
Upper Control Arm to Frame -
Lower Control Arm to Frame -
Upper Ball joint stud -
Lower Ball joint stud -
upper end link nut -
lower end link nut -
sway bar to frame bushing bolts -
upper shock nut -
lower shock nuts -
2 - 21mm Caliper mount bolts -
20" factory wheels -
inner tie rod -
outer tie rod jam nut -