RAS NJ
Junior Member
If i change in Cab Net: Blind Spot Module to "Enable" and Blind Spot Sensor to "Enable" will I now have blind spot detection???
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not likely. You need to have the modules in your taillights as well as the correct mirrors. you can order a kit with all that stuff, but it isn't cheap.
Welcome to the board.
I added it to my 4th Gen. This is a great thread on how to do it. Roman made my harness and is a big help if you have any questions.Do you know what years that could be done on? Our new Jeep has it and really wish my 2015 did as well. Last time I asked I was told here to "learn how to drive and use the mirrors".
I added it to my 4th Gen. This is a great thread on how to do it. Roman made my harness and is a big help if you have any questions.
2019 HD Tail lights in a 4th gen
Well I got everything wired up now. Just put in some temporarily LEDs to get the BSM up and running. Unfortunately there is one issue, every time I start the truck, I get a message saying that BSM is turned off even though it is actually on. Everything appears to be working as it should (at...www.ramforum.com
Do you still build the harnesses?The taillights came from Mopar (well eBay) and I made the conversion harness & module myself.