littlebiscuit
Member
Thought post up here little quick install on this after market cargo cam from crutchfield. This is for 2018 ram tradesman. I purchased the RCA from Mike at M2Mods. Pretty much plug and play. You do have to find 12 volt power if you want to be able to turn camera on if your not in reverse. No instruction came from aftermarket camera but was worth the money. All I had to do was grab 12 volts of the cigarette lighter port to power camera and plug RCA into back of radio connector pins 24 and 25 unless you all ready have wires in connector. I just finished the 8.4 upgrade and my connector wasn't wired. I replaced a 3.0 RA1 for the 8.4 w NAV. Using alpha obd 2 pics of what I did to activate on radio screen. Link to camera: https://www.crutchfield.com/p_249CDR03C/Crux-CDR-03C.html?omnews=14856427.
Attachments
Last edited: