front camera 68453843 pinout

[hehota8624]

I recently aquired a 2022 ram warlock and the radio is a 68453843 which seems to have a different harness(s) than pictured on threads i've seen about adding a front camera to a ram 1500.

Does anyone happen to know the pinouts on these harnesses and where I could tap into the rear cargo camera?

 

[SitKneelBend]

I recently aquired a 2022 ram warlock and the radio is a 68453843 which seems to have a different harness(s) than pictured on threads i've seen about adding a front camera to a ram 1500.

Does anyone happen to know the pinouts on these harnesses and where I could tap into the rear cargo camera?

This site may help...

https://connectorrepairkit.mopar.com

I've found the easiest place is at the radio and you will find that on the aforementioned site you can filter that harness by entering "radio C1"...

 

[hehota8624]

This site may help...

https://connectorrepairkit.mopar.com

I've found the easiest place is at the radio and you will find that on the aforementioned site you can filter that harness by entering "radio C1"...

I must not be that smart. I cant make heads or tales of any of those links.

 

[SitKneelBend]

I must not be that smart. I cant make heads or tales of any of those links.

Enter your year and then select "DS" for the model. On the following page, type "radio C1" in the filter. That will give you a listing of the connections for the radio. On that diagram you will see a listing of wire colors/functions on the right.

 

[hehota8624]

okay I've figured out which wires would go where but how do I find out what type of connectors I need to order from mouser to connect to the harness?

 

[SitKneelBend]

okay I've figured out which wires would go where but how do I find out what type of connectors I need to order from mouser to connect to the harness?

Here you go...

https://www.mouser.com/ProductDetail/571-638551-3-LP

And this tool to crimp...

https://www.amazon.com/gp/product/B00OMM4YUY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

On Amazon the listing for that tool has one that comes with connectors, the "might" be the ones you need.

 

[hehota8624]

Here you go...

https://www.mouser.com/ProductDetail/571-638551-3-LP

And this tool to crimp...

https://www.amazon.com/gp/product/B00OMM4YUY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

On Amazon the listing for that tool has one that comes with connectors, the "might" be the ones you need.

Thanks! I appreciate your help, but how do you figure out what type of connectors each harness uses?

 

[SitKneelBend]

Thanks! I appreciate your help, but how do you figure out what type of connectors each harness uses?

I asked @Mpgrimm2, then I save the information for a rainy day!

 

[Mpgrimm2]

Here you go...

https://www.mouser.com/ProductDetail/571-638551-3-LP

And this tool to crimp...

https://www.amazon.com/gp/product/B00OMM4YUY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

On Amazon the listing for that tool has one that comes with connectors, the "might" be the ones you need.

That '22 radio PN is a uConnect 5 with the smaller "dual connector" setup vs larger 42 pin Tyco connector on 13-18/19-21 classic trucks. I don't have that info

 

[SitKneelBend]

That '22 radio PN is a uConnect 5 with the smaller "dual connector" setup vs larger 42 pin Tyco connector on 13-18/19-21 classic trucks. I don't have that info

Are you saying what I linked is wrong for newer radios? I thought OP had a 4th Gen which I assumed was a UAQ/UAS but I may just be mistaken. Or do Classics get UConnect 5s now (if so I may start tinkering again!)?

 

[Mpgrimm2]

Are you saying what I linked is wrong for newer radios? I thought OP had a 4th Gen which I assumed was a UAQ/UAS but I may just be mistaken. Or do Classics get UConnect 5s now (if so I may start tinkering again!)?

22 (mid year?) & up classic got the dual connector uConnect 5 (not the 5c) radio if I got the language right.

I can't seem to get your links to work but based on your Mopar connector repair image, I believe that's incorrect for the pins.

 

[SitKneelBend]

22 (mid year?) & up classic got the dual connector uConnect 5 (not the 5c) radio if I got the language right.

I can't seem to get your links to work but based on your Mopar connector repair image, I believe that's incorrect for the pins.

Thanks, now I know! Those are the PINs for the connector I posted so if he has the newer radio they would be wrong. Appreciate the correction...

 

[hehota8624]

I appreciate the help gents. So how do i figure out what connectors I need?

 

[SitKneelBend]

I appreciate the help gents. So how do i figure out what connectors I need?

I suppose first we need to see what radio you have. Do you have any pictures of the back of the radio and the connectors present?

 

[hehota8624]

 

[SitKneelBend]

View attachment 548494

I'm not sure what pin you need, but here are the connector diagrams. Can you conclude what pins are necessary from the wire gauge specified? When googling the repair kit part number I do not receive a listing of parts supplied in the kit...

 

[hehota8624]

I've already figured out which pinouts I need to use for the camera, its just making sure I buy the right connector ends. Do these pictures tell you guys anything?

 

[hehota8624]

Bump