Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I don't disagree with this.Everything I have read is that these days, bc jvc owns kenwood, they are basically the same units internally.
I am going to go ahead with the JVC.. will report back on the experience
I installed this in mine using the iDatalink Maestro and the iDatalink install kit. Everything was pretty straight forward but removing the 3 knobs from the factory bezel to intall in the iDatalink bezel was a PITA. Definitely the hardest part of the install. You will need a sawzall to cut out the original radio support (I also used a dremel to smooth out the areas I cut.I hate to kick a dead horse multiple times but got a great deal on a JVC but still curious to hear what you think and anything regarding install. I see iDatalink has their own dash install kit but it’s $149 vs $18 for the Scosche. Any takers?!
I just installed this last night after work over 2.5 hours, more appropriately, I threw this together as I wouldn't have a free weekend for several weeks. This unit is awesome but I have couple of questions for you guys that did it.
I used iDatalink KIT-RAM1 dash install and wiring, iDatalink ACC-HU-KEN1 radio specific harness, iDatalink Maestro RR2, iDatalink SAT2 antenna adapter, SiriusXM SXV300V1 Tuner, and iDatalink ACC-USB-RAM USB port adapter.
* Since I was just doing things without thinking in a hurry, the instructions had me change the unit's screen position to the out or forward position - I am thinking it would definitely be best to go back to the back or inward position - is that how you guys have done it?
* Height I believe I can easily adjust on the go so no real issue there - Do I need to remove the screen from the headunit prior to adjusting height?
* I am using the specific JVC harness with the iDatalink t-harness, etc. - Do I still have to use the mic from JVC - wouldn't the Maestro use the trucks existing microphone or how does that work?
* I bought an adapter for the satellite tuner to use my factory antenna - were ya'll able to use ACC_NAV1 for the GPS antenna or must use JVCs?