IwantaRAM
Junior Member
- Joined
- Nov 8, 2018
- Posts
- 27
- Reaction score
- 9
- Location
- Santa Barbara
- Ram Year
- 2018 Power Wagon
- Engine
- Hemi 6.4L
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
What part are you looking for? The usb comes as a unit, just plugs into existing wiring.Any chance you can post the part# or link for the 12V part? I checked through that Mopar site and cant find it. Thanks in advance
No idea, I had 2 in the front and 1 in the console already wired from the factory.no, looking for the 12V plug not the USB. Thanks!
I’m sorry I misunderstood, I thought you wanted the usb to be on the drivers side, you wanted constant power to the drivers side correct?Also, I tried swapping the two plugs. It’s not possible without extending wires. The right USB plug is longer and tucked up near the HVAC vent so it won’t reach. Going to run a dedicated line from the battery.
What does it look like after installed? I have a 2019 Ram Classic with bench seat setup and wondered if this would fit.You sure can, I installed a center console and have switched all of the power outlets to usb. The oem USB ports have the same alignment pin and same connector. You can either swap the one from the right to the left or you can order a new one for the left side. They simply pop out, pop the new one in and connect the power.
I would suggest removing the bottom plastic it’s only a few bolts, way easier to pop out from the back.
https://www.mymoparparts.com/oem-parts/mopar-usb-charging-port-68365897aa
View attachment 156998 View attachment 156997 View attachment 156996