Search results

  1. fxnytro17

    2013, ram power steering. Board rebuild??

    Anybody ever repair a board for their power steering. Took the cover plate off , no signs of corrosion. Board has power and belt on motor is good. Computer says board is the problem. But it looks new. Best price so far was 1400 bucks for the rack, with no guarentees it will work. If it does...
  2. fxnytro17

    Passenger Output shaft repair

    Here it goes. Driving with a worn front output shaft now for about 6 years now. Finically found a kit, came with everything needed. Bought two new cv axles as well. See how it goes I guess. Shouldn’t be to bad.
  3. fxnytro17

    Tipm, connector corrosion

    Hey guys, with all the links posted in the past still can’t seem to find any detailed info. I have Tipm issues. Tipm seems to be in good shape. Some corrosion on the green plug side tho. When removing noticed wires broken. Now I have three altogether broken. Every time I touch the thjng I’m...
  4. fxnytro17

    Will it fit? I’m trying anyways lol

    Old 315/70 r17s are worn and basically threadless. Picked these up the other day for 1000 bucks. I wanted to go back to 20” rims and the tires I might take off anyways but not before trying them out. Theyre bud Goodrich mud terrains 325/60R20s which Meade 35” exact on the tape as they stand...
    • fxnytro17
    • Thread
    • 1500 20" 35" 5100 fuel hemi inch ram rims tire
    • Replies: 10
    • Forum: Exterior
  5. fxnytro17

    3.92 backlash

    Hey guys, recently discovered I had a rear seal leak. So instead of just doing the seals I did the outer bearings And seals also all the handbrake hardware, backing plates, rotors, etc. Crown gear looked fine to me but just for curiosity I checked the backlash in a few spots. I was getting...
  6. fxnytro17

    BBK header quality

    Here’s a picture of my headers I installed 16 months ago. Chrome plated BBK shorties Tried contacting bbk directly 2 days ago still no response.
  7. fxnytro17

    6.7l with Bullydog tune

    hey guys, In the process of buying a 13’ ram 2500 outdoorsman. Seems to be a quality truck. 125000 kms. The dealership told me they had done the emission deletes and added a bully dog tuner after it was traded in. I can’t find much info on the bully dog tuner with diesels. Any info on the...
  8. fxnytro17

    Knocking when at low rpm

    2013 sport, If I’m going over a hill with the engine in (for example) 6th gear, straining at a low rpm, it will start knocking badly. It doesn’t happen on the highway because the Rpms don’t get low enough. I’m talking like 1000-1200. Sounds like a diesel CAT ! Once I change the rpm or switch...
  9. fxnytro17

    Here's another good one

    I may have been "off-roading" I guess. But no I was not going fast or being reckless. Noticed it this morning when I went to the airport. Another one to add to the ram problems.
  10. fxnytro17

    Ram front diff

    Anybody know if there is any reason I couldn't put a 09-10 ram 1500 front end in a 2013? I have the output shaft problem. Only way of fixing it is buying the whole thing. F it happened once it will happen again so why not just buy an older one which has replaceable parts in it. Thanks
  11. fxnytro17

    Bbk header out of box with rust

    Received my shorties today with the chrome finish. They ahead seem to have some surface rust. Also put a straight edge across them. I never used a feeler gauge but it's close to a 1/16" of an inch difference in the middle of the flange then the sides. This a common thing? Or is it just my...
  12. fxnytro17

    Out of the box with rush..bbk header

    Received my shorties today with the chrome finish. They ahead seem to have some surface rust. Also put a straight edge across them. I never used a feeler gauge but it's close to a 1/16" of an inch difference in the middle of the flange then the sides. This a common thing? Or is it just my...
  13. fxnytro17

    2013 sport

    As common as it gets! At just over 140k kms with all synthetic oil changes -315/70 r17 duratracs on -6 mm MB wheels - Bilsteins in the front on 2.1 -Air lift bags in the rear - Hemifever tuned - HID hi and low beams I have the bbk short headers on the way because right now the manifold...
  14. fxnytro17

    New garage floor

    24'x36' 4" thick with 6" stepped sides Waiting for my next job so I can build it! Sick of doing stuff in my driveway..
  15. fxnytro17

    Help.. Stub shaft problem

    2013 ram. Cv axle and stub shaft worn. The axle is off long ago and started at the stub shaft. Used a 10lbs shackle as a sliding hammer on pipe. No go. Am I missing something.? Napa gave the the stub to go in it but the diagrams I find show a fairly long one compared to the one I have. The...

Latest posts

Members online

Total: 696 (members: 30, guests: 666)
Robots: 960

Forum statistics

Threads
196,202
Posts
2,878,984
Members
157,324
Latest member
cduckey41

Share this page

Top