Search results

  1. M

    Trailer Brakes Not Working

    Ok so I had just about given up and actually ordered an aftermarket brake controller from Amazon. After I ordered it I decided to go through absolutely everything one last time (I prefer a factory option). Checked all the harnesses, even had the fender lining out again to inspect that. Finally...
  2. M

    Trailer Brakes Not Working

    Checked all of those with the acception of f11 and f87. I will let you know on that.
  3. M

    Trailer Brakes Not Working

    With the brake pedal pressed with the engine running there was no change on the 10 pin plug but on the 4 pin the green/white got 14v. Odd the way no change on the 10pin with the brake pedal pressed isn’t it? Maybe that’s more from the abs module and other modules when the truck is in drive and...
  4. M

    Trailer Brakes Not Working

    Didn’t try with brake pedal pressed so will update shortly.
  5. M

    Trailer Brakes Not Working

    Thanks for the reply. Yes that was one of the first things I did when I installed the module the dealer told was for the 2020 vin. With the truck running I had the following. 4 pin connector -14v on red -Confirmed ground on the black. -nothing on remaining 2. 10 pin connector -2v on...
  6. M

    Trailer Brakes Not Working

    Thanks for the reply! Yep the whole canbus system and wiring in the truck is now 2020 so that module is within the range of the electrical components. It’s only really the body of the truck and chassis that is 2014 along with a few other bits inside the truck. I did see that post about the...
  7. M

    Trailer Brakes Not Working

    I’m thinking it could be a module issue as well. I went to a wrecking yard before the dealer to see if I could find the module they suggested for a 2020 and there seemed to be a different module in every truck I found one in, not sure on the year of each truck I looked at though and neither did...
  8. M

    Trailer Brakes Not Working

    Electrically all that’s original to the 2014 is Fuel pump Dash (gauges) Airbags Airbag module Interior light in headlinining Wiper motor Windshield washer pump Door lock motors Window motors Trailer plug that mounts in bumper Tow haul button Door switches accept drivers door Radiator cooling...
  9. M

    Trailer Brakes Not Working

    Yeah I did think something came up when I had them working before doing all the work to the truck. Thanks!
  10. M

    Trailer Brakes Not Working

    Thanks for the replies, everything electrically is from the 2020 tradesmen truck, every wiring harness, bcm, pcm abs module, engine, trans, transfer box, rf module and keys. I did have functioning factory trailer brakes in the truck before I did the work and initially put the original TBM and...
  11. M

    AlfaObd and Obdlink MX+ systems access priblem

    I had trouble connecting with alfaobd initially, have you tried extending the parameters on the access time? Also ensure the bypass cable is plugged in to the cambus all the way aswell as the obd port. What are using to access it with, windows or android?
  12. M

    Trailer Brakes Not Working

    Ok guys, really hoping for some help on this one. I have read many trailer brake posts but have not had any luck getting mine to work. I have a 2014 dodge ram 1500 Slt quad cab. It is however electrically 98% 2020 tradesman. I can go more in to that if needed but don’t want to bore everyone...
  13. M

    2014 5.7 6spd to 6.4 8spd swap.

    Hi, just checking in to see if you had any luck. I put in an engine and transmission from a 2020 and stuck on the shifter cable as well, mine had the 6 speed column shift. Thinking I might have to get the harness behind the dash. I have installed the pcm that came with 2020 drivetrain, is there...
  14. M

    2014 5.7 1500 Drivetrain Swap

    I have a 2014 5.7 1500 with the 6 speed. Long story short engine went and repair cost was going to be huge for that engine. Truck has higher mileage but found a 2020 truck accident damage with extremely low mileage, all running gear complete, interior removed as well as body panels. It is the 8...
  15. M

    2014 5.7 1500 Drivetrain Swap

    I have a 2014 5.7 1500 with the 6 speed. Long story short engine went and repair cost was going to be huge for that engine. Truck has higher mileage but found a 2020 truck accident damage with extremely low mileage, all running gear complete, interior removed as well as body panels. It is the 8...
  16. M

    Cylinder 6 misfire issue

    I have a 2014 5.7hemi, done approximately 146k miles. Developed a miss fire in #6, done the plugs and coil swap, started up and was making a tapping sound (no tapping sound before just rough), reved it and it went away but comes back on idle. Thinking it’s the mds solenoids so went to work on...
  17. M

    2014 4th Gen Missfire

    I have a 2014 5.7hemi, done approximately 146k miles. Developed a miss fire in #6, done the plugs and coil swap, started up and was making a tapping sound (no tapping sound before just rough), reved it and it went away but comes back on idle. Thinking it’s the mds solenoids so went to work on...

Latest posts

Members online

Total: 636 (members: 34, guests: 602)
Robots: 927

Forum statistics

Threads
196,216
Posts
2,879,191
Members
157,351
Latest member
stevo5441

Share this page

Top