Driving/Fog Lights

[04RAM_3]

My 04 doesn't have them. Instead it has the grills in the bumper. I can buy the lights from Amazon. How do I wire them? I'm not concerned about a switch. I'd never turn them off anyway. So would I tap the low beam power supply? Then they would come on with the headlights, and turn off the way they're supposed to when the high beams are on....... Right?

 

[Motorpirate]

I wired them to a relay, tripped by the parking lights.
That way they are on with the low and high beams.
I didn't add a switch.

 

[aszumilo]

The harness should already be there for the fog lights. It was on my 04. I have an extra headlight switch for it, if you want it you can have it.

I got my lights off a truck in the junkyard. There are 3 bolts, on each light, that hold the bracket to the truck. If you get them off Amazon, make sure they have the brackets.

Took about 20-30 minutes to install them and put the switch in.

 

[04RAM_3]

The harness should already be there for the fog lights. It was on my 04. I have an extra headlight switch for it, if you want it you can have it.

I got my lights off a truck in the junkyard. There are 3 bolts, on each light, that hold the bracket to the truck. If you get them off Amazon, make sure they have the brackets.

Took about 20-30 minutes to install them and put the switch in.

Thank you for the offer. Much appreciated

I got them installed today. The lights I bought came with a harness and switch. I wired them in using a spare relay spot in the fuse box for power. They come on with the key and double as DRL's. The switch was rather large and I couldn't find a way inside the cab without drilling a large hole in the firewall, so it's under the hood for the time being

The bezels that came with the kit absolutely do not fit, so I used the ones that were already in the truck with the grill in them. Worked perfectly, and maybe will keep the lights from breaking