Dave00
Junior Member
Yesterday I finished my cam/lifter job, and the motor sounded awful, all sorts of ticking and a ton of shaking. Even after a tune it wont idle much. Also to note I had a p0108 and the red lightning bolt symbol was flashing like crazy, which I believe is the throttle body. I believed it to be a pushrod popped loose maybe but I have yet to take valve covers off which Ill get to tomorrow. Lifters were bathed in oil overnight but the motor did run for a couple minutes which I assume would bleed the lifters. I did put a vaccum gague and the vaccum was jumping up and down consistently no matter what. No codes for timing and no misfire codes (yet). I am pretty worried so any opinions or ideas are extremely helpful.
Related Parts: Btr truck norris cam, btr valve springs/pushrods, comp cams 856y lifters, and tuning by hemifever
Related Parts: Btr truck norris cam, btr valve springs/pushrods, comp cams 856y lifters, and tuning by hemifever