Diagnostic Trouble Code P22A7 means that NOx Sensor Heater Sense Circuit Range/Performance (Bank 1 Sensor 2) has been detected
Diagnostic Trouble Code P225E means that NOx Sensor Performance has been detected.
Just a quick Google search turned up these
Is this the console you are working with? If so there are just three screws you need to remove to get to the power plug. Pull up the rubber just below the ac controls there are 2 screws there and also pull the rubber in the middle of the console there is 1 screw there, then you just need to pull...
I really can't help with your issue. But I'm a little confused. Why you started with a 18. down graded wiring from a 16, added a radio from a 15 just to upgrade your radio to the 8.4. Why did you not just upgrade to the 8.4 radio from a 18 model year? I don't believe you would be having this...
If you are replacing the RF hub don't buy used, as it may not work with your vehicle do to vin mismatch. Buy a new one they can be had for about the same price.
@Kul1g. If you bought parts from someone using the name Benny supposedly at allmopartparts. I believe you have been in my opinion Scammed as the Benny here is a Respected Vendor of quality New OEM parts and not a used parts supplier.
Not sure about the Fuel Page, but the trailers names not working maybe caused by using a aftermarket Brake controller. Added a aftermarket Brake controller and had the same issue. Replaced with a OEM controller and was able to name the trailers,
@tbowers391. I would try another remote. I just went through the same issue with new remote, turns out the remote was not compatible with my truck. Replaced with new fob and everything worked out fine.
In addition to the info you've received there is a possibility that your RF hub my be on the fritz. I'm not sure of the steps needed to check it's operation but it could be your culprit.
IIRC if you are replacing your current RF Hub with a new one. The Pin for the new hub may need to be entered as 0000. As you are using a new hub unit. Your old pin should still be used to program fobs for your vehicle. When I replaced my RF Hub from key to push to start that is how I swapped the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.