Leaking ATF Fluid after installing Thermal Bypass Valve

[Gr8bawana]

Has anyone had similar problems with other brands of by-pass?
I was wondering why you couldn't just use some high pressure hydraulic hose with a couple of clamps. The ends of the hard lines have ridges that would help hold the hose in place with the clamps.

 

[JW2 Innovations]

There's a hose clamp on the front side set of hoses already, then the block thats basically drilled through passageways, then the two hard line hoses from there into the transmission as you move back.

I used a no name product for this myself, and works great with no leaks. Probably could just use some slightly oversized orings on what he has would fix this.