35x12.50R20 on stock wheels, leveled truck

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SuperTrooper

Senior Member
Joined
Jun 2, 2014
Posts
312
Reaction score
32
Location
Douglas, GA
Ram Year
2014
Engine
5.7 Hemi
Hey guys, curious if anyone is running this setup on their truck. I've shied away from the idea of lifting my truck due to voiding my lifetime warranty. I'm curious if anyone is running 35x12.50s on their leveled trucks on stock wheels. If you could, post a few pictures from different angles so I can see how it sit.

I'm aware I'll have to run 1/4 inch spacers. What I'm also curious about is how close the sidewall is to the Zone arms' ball joint knuckles if you're running them. They seem pretty close even with my stock tires.

Thanks, Chris.
 

Birddog

Senior Member
Joined
Sep 1, 2012
Posts
2,472
Reaction score
894
Location
West Palm Beach, FL
Ram Year
2016 Bright White 3500 Laramie 4X4 Long Bed
Engine
6.7 Cummins TD, 3.73
I'm sure someone is but you may have to wait until morning for a reply. I'm sure someone will chime in soon.
 

Andrew09HEMI

Senior Member
Joined
Feb 26, 2014
Posts
812
Reaction score
263
Ram Year
2014
Engine
Hemi 6.4
Ive posted mine a few times, ProComp Prorunner leveling struts up front with 35x12.50s 20s with wheel spacers
416ad6abbe682040e951adbdd928b99d.jpg
 

lokal907ryder

Senior Member
Joined
Jun 22, 2014
Posts
321
Reaction score
217
Location
wasilla, AK
Ram Year
2014
Engine
5.7 hemi
Ive posted mine a few times, ProComp Prorunner leveling struts up front with 35x12.50s 20s with wheel spacers
416ad6abbe682040e951adbdd928b99d.jpg

thats exacty how i want my 2014 to sit when i upgrade my 33's to 35's. i have the bilsteins set at 2.1 but im going to move them to 2.8. are you running a spacer in the back? and what size wheel spacers?
 

Andrew09HEMI

Senior Member
Joined
Feb 26, 2014
Posts
812
Reaction score
263
Ram Year
2014
Engine
Hemi 6.4
Yes I have a rear 1.5" spring spacer and the wheel spacers are hubcentirc 1.5" solid steel from eBay. So far so good, also consider Bora spacers they are pricey but are the best available, I just didn't want to wait 4 weeks for them to be made
 

lokal907ryder

Senior Member
Joined
Jun 22, 2014
Posts
321
Reaction score
217
Location
wasilla, AK
Ram Year
2014
Engine
5.7 hemi
Yes I have a rear 1.5" spring spacer and the wheel spacers are hubcentirc 1.5" solid steel from eBay. So far so good, also consider Bora spacers they are pricey but are the best available, I just didn't want to wait 4 weeks for them to be made

ok thanks! i havent looked up the pro comp struts, how much lift did they give you?
 

Andrew09HEMI

Senior Member
Joined
Feb 26, 2014
Posts
812
Reaction score
263
Ram Year
2014
Engine
Hemi 6.4
They gave just about 3" after settling, was slightly more right after install
 
Top